Bounce

[Flip]

My ego has a Fair bit of noticeable bounce.
How do i change it?
the Debounce is all the way up on the board. and the set screw is either stripped /doesnt wanna go back anymore.

[bigred]

take an allen key, and put it between the actual microswitch (silver piece) and the black box containing the mechanism, and put a slight amount of pressure on the trigger so the silver switch bends slightly, dont do this too much, but if you do it just enough it will eliminate bounce and give you a super light, airy trigger pull, i personally do it to every single one of my triggers.

[kitchengod]

thats not recomended as you can damage it if you bend it too much.

[Flip]

YEa not gonnan mess with the microswitch like that

[bigred]

thats why you only do it if you know what your doing. And if you do damage it by bending it too much, first of all you shouldnt be paintballing if you have that little common sense, but if you do its like, a dollar for a new one? i have like 7.

only way to get no bounce other than that, if you want ill do it for you and ill warranty it that if i break the switch, i buy you a new board.

[Phy]

what is bounce anyhow?

[bigred]

when your trigger automatically shoots on its own in semi, due to gun vibration or bad trigger adjustment activating the microswitch more than once

[andrew]

if you dont know take it to someone that does know. insted of asking on hear.

[Flip]

Why take it to someone and have to prob pay for them to do it when i can ask for some Free Advise here?

[bigred]

ill do it for free

[Punisher]

I wouldnt go anywhere near the switch with anything.

[Flip]

I dont intend to let Bigred OR myself tought it.
one ball bounce is fine with me.